CiscoNX-OS Deprecated

category: IT Services
provider: Cisco Systems
commonfields:
  id: CiscoNX-OS
  version: -1
configuration:
- additionalinfo: The credentials to associate with the instance. SSH keys can be configured using the credential manager, under the Certificate field.
  display: Username
  name: creds
  required: true
  type: 9
- additionalinfo: The default port to use if one is not specified in the commands `host` argument.
  defaultvalue: "22"
  display: Default SSH Port
  name: port
  required: true
  type: 0
- additionalinfo: If multiple hosts are specified in a command, how many hosts should be interacted with concurrently.
  defaultvalue: "4"
  display: Concurrecy Factor
  name: concurrency
  required: true
  type: 0
description: Cisco NXOS Platform management over SSH. Deprecated. Use Ansible Cisco NXOS (from the Ansible Cisco NXOS pack) instead.
display: Ansible Cisco NXOS (Deprecated)
name: CiscoNX-OS
script:
  commands:
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: The server type is either radius or tacacs.
      name: server_type
      predefined:
      - radius
      - tacacs
      required: true
    - description: Global AAA shared secret or keyword 'default'.
      name: global_key
    - auto: PREDEFINED
      description: The state of encryption applied to the entered global key. O clear text, 7 encrypted. Type-6 encryption is not supported.
      name: encrypt_type
      predefined:
      - "0"
      - "7"
    - description: Duration for which a non-reachable AAA server is skipped, in minutes or keyword 'default. Range is 1-1440. Device default is 0.
      name: deadtime
    - description: Global AAA server timeout period, in seconds or keyword 'default. Range is 1-60. Device default is 5.
      name: server_timeout
    - auto: PREDEFINED
      description: Enables direct authentication requests to AAA server or keyword 'default' Device default is disabled.
      name: directed_request
      predefined:
      - enabled
      - disabled
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - default
    description: Manages AAA server global configuration.
    name: nxos-aaa-server
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: The server type is either radius or tacacs.
      name: server_type
      predefined:
      - radius
      - tacacs
      required: true
    - description: Address or name of the radius or tacacs host.
      name: address
      required: true
    - description: Shared secret for the specified host or keyword 'default'.
      name: key
    - auto: PREDEFINED
      description: The state of encryption applied to the entered key. O for clear text, 7 for encrypted. Type-6 encryption is not supported.
      name: encrypt_type
      predefined:
      - "0"
      - "7"
    - description: Timeout period for specified host, in seconds or keyword 'default. Range is 1-60.
      name: host_timeout
    - description: Alternate UDP port for RADIUS authentication or keyword 'default'.
      name: auth_port
    - description: Alternate UDP port for RADIUS accounting or keyword 'default'.
      name: acct_port
    - description: Alternate TCP port TACACS Server or keyword 'default'.
      name: tacacs_port
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages AAA server host-specific configuration.
    name: nxos-aaa-server-host
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Sequence number of the entry (ACE).
      name: seq
    - description: Case sensitive name of the access list (ACL).
      name: name
      required: true
    - auto: PREDEFINED
      description: Action of the ACE.
      name: action
      predefined:
      - permit
      - deny
      - remark
    - description: If action is set to remark, this is the description.
      name: remark
    - description: Port number or protocol (as supported by the switch).
      name: proto
    - description: Source ip and mask using IP/MASK notation and supports keyword 'any'.
      name: src
    - auto: PREDEFINED
      description: Source port operands such as eq, neq, gt, lt, range.
      name: src_port_op
      predefined:
      - any
      - eq
      - gt
      - lt
      - neq
      - range
    - description: Port/protocol and also first (lower) port when using range operand.
      name: src_port1
    - description: Second (end) port when using range operand.
      name: src_port2
    - description: Destination ip and mask using IP/MASK notation and supports the keyword 'any'.
      name: dest
    - auto: PREDEFINED
      description: Destination port operands such as eq, neq, gt, lt, range.
      name: dest_port_op
      predefined:
      - any
      - eq
      - gt
      - lt
      - neq
      - range
    - description: Port/protocol and also first (lower) port when using range operand.
      name: dest_port1
    - description: Second (end) port when using range operand.
      name: dest_port2
    - auto: PREDEFINED
      description: Log matches against this entry.
      name: log
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the URG bit.
      name: urg
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the ACK bit.
      name: ack
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the PSH bit.
      name: psh
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the RST bit.
      name: rst
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the SYN bit.
      name: syn
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match on the FIN bit.
      name: fin
      predefined:
      - enable
    - auto: PREDEFINED
      description: Match established connections.
      name: established
      predefined:
      - enable
    - auto: PREDEFINED
      description: Check non-initial fragments.
      name: fragments
      predefined:
      - enable
    - description: Name of time-range to apply.
      name: time_range
    - auto: PREDEFINED
      description: Match packets with given precedence.
      name: precedence
      predefined:
      - critical
      - flash
      - flash-override
      - immediate
      - internet
      - network
      - priority
      - routine
    - auto: PREDEFINED
      description: Match packets with given dscp value.
      name: dscp
      predefined:
      - af11
      - af12
      - af13
      - af21
      - af22
      - af23
      - af31
      - af32
      - af33
      - af41
      - af42
      - af43
      - cs1
      - cs2
      - cs3
      - cs4
      - cs5
      - cs6
      - cs7
      - default
      - ef
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
      - delete_acl
    description: Manages access list entries for ACLs.
    name: nxos-acl
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Case sensitive name of the access list (ACL).
      name: name
      required: true
    - description: Full name of interface, e.g. `Ethernet1/1`.
      name: interface
      required: true
    - auto: PREDEFINED
      description: Direction ACL to be applied in on the interface.
      name: direction
      predefined:
      - ingress
      - egress
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages applying ACLs to interfaces.
    name: nxos-acl-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Specifies which banner that should be configured on the remote device.
      name: banner
      predefined:
      - exec
      - motd
      required: true
    - description: The banner text that should be present in the remote device running configuration. This argument accepts a multiline string, with no empty lines. Requires `state=present`.
      name: text
    - auto: PREDEFINED
      defaultValue: present
      description: Specifies whether or not the configuration is present in the current devices active running configuration.
      name: state
      predefined:
      - present
      - absent
    description: Manage multiline banners on Cisco NXOS devices
    name: nxos-banner
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: |-
        Loopback interface used for echo frames.
        Valid values are loopback interface name or 'deleted'.
        Not supported on N5K/N6K
      name: echo_interface
    - description: BFD Echo receive interval in milliseconds.
      name: echo_rx_interval
    - description: |-
        BFD interval timer values.
        Value must be a dict defining values for keys (tx, min_rx, and multiplier)
      isArray: true
      name: interval
    - description: BFD slow rate timer in milliseconds.
      name: slow_timer
    - description: |-
        BFD delayed startup timer in seconds.
        Not supported on N5K/N6K/N7K
      name: startup_timer
    - description: BFD IPv4 session echo receive interval in milliseconds.
      name: ipv4_echo_rx_interval
    - description: |-
        BFD IPv4 interval timer values.
        Value must be a dict defining values for keys (tx, min_rx, and multiplier).
      isArray: true
      name: ipv4_interval
    - description: BFD IPv4 slow rate timer in milliseconds.
      name: ipv4_slow_timer
    - description: BFD IPv6 session echo receive interval in milliseconds.
      name: ipv6_echo_rx_interval
    - description: |-
        BFD IPv6 interval timer values.
        Value must be a dict defining values for keys (tx, min_rx, and multiplier).
      isArray: true
      name: ipv6_interval
    - description: BFD IPv6 slow rate timer in milliseconds.
      name: ipv6_slow_timer
    - description: |-
        BFD fabricpath interval timer values.
        Value must be a dict defining values for keys (tx, min_rx, and multiplier).
      isArray: true
      name: fabricpath_interval
    - description: BFD fabricpath slow rate timer in milliseconds.
      name: fabricpath_slow_timer
    - description: BFD fabricpath control vlan.
      name: fabricpath_vlan
    description: Bidirectional Forwarding Detection (BFD) global-level configuration
    name: nxos-bfd-global
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The provided configuration
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manages BFD attributes of nxos interfaces.
    name: nxos-bfd-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.
      name: asn
      required: true
    - description: Name of the VRF. The name 'default' is a valid VRF representing the global BGP.
      name: vrf
    - description: Enable/Disable MED comparison on paths from different autonomous systems.
      name: bestpath_always_compare_med
    - description: Enable/Disable load sharing across the providers with different (but equal-length) AS paths.
      name: bestpath_aspath_multipath_relax
    - description: Enable/Disable comparison of router IDs for identical eBGP paths.
      name: bestpath_compare_routerid
    - description: Enable/Disable neighborid. Use this when more paths available than max path config.
      name: bestpath_compare_neighborid
    - description: Enable/Disable Ignores the cost community for BGP best-path calculations.
      name: bestpath_cost_community_ignore
    - description: Enable/Disable enforcement of bestpath to do a MED comparison only between paths originated within a confederation.
      name: bestpath_med_confed
    - description: Enable/Disable assigns the value of infinity to received routes that do not carry the MED attribute, making these routes the least desirable.
      name: bestpath_med_missing_as_worst
    - description: Enable/Disable deterministic selection of the best MED pat from among the paths from the same autonomous system.
      name: bestpath_med_non_deterministic
    - description: Route Reflector Cluster-ID.
      name: cluster_id
    - description: Routing domain confederation AS.
      name: confederation_id
    - description: AS confederation parameters.
      name: confederation_peers
    - description: Enable/Disable the batching evaluation of prefix advertisement to all peers.
      name: disable_policy_batching
    - description: Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.
      name: disable_policy_batching_ipv4_prefix_list
    - description: Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.
      name: disable_policy_batching_ipv6_prefix_list
    - description: Enable/Disable enforces the neighbor autonomous system to be the first AS number listed in the AS path attribute for eBGP. On NX-OS, this property is only supported in the global BGP context.
      name: enforce_first_as
    - auto: PREDEFINED
      description: Enable/Disable cli event history buffer.
      name: event_history_cli
      predefined:
      - size_small
      - size_medium
      - size_large
      - size_disable
      - default
    - auto: PREDEFINED
      description: Enable/Disable detail event history buffer.
      name: event_history_detail
      predefined:
      - size_small
      - size_medium
      - size_large
      - size_disable
      - default
    - auto: PREDEFINED
      description: Enable/Disable event history buffer.
      name: event_history_events
      predefined:
      - size_small
      - size_medium
      - size_large
      - size_disable
      - default
    - auto: PREDEFINED
      description: Enable/Disable periodic event history buffer.
      name: event_history_periodic
      predefined:
      - size_small
      - size_medium
      - size_large
      - size_disable
      - default
    - description: Enable/Disable immediately reset the session if the link to a directly connected BGP peer goes down.  Only supported in the global BGP context.
      name: fast_external_fallover
    - description: Enable/Disable flush routes in RIB upon controlled restart. On NX-OS, this property is only supported in the global BGP context.
      name: flush_routes
    - description: Enable/Disable graceful restart.
      name: graceful_restart
    - description: Enable/Disable graceful restart helper mode.
      name: graceful_restart_helper
    - description: Set maximum time for a restart sent to the BGP peer.
      name: graceful_restart_timers_restart
    - description: Set maximum time that BGP keeps the stale routes from the restarting BGP peer.
      name: graceful_restart_timers_stalepath_time
    - description: Enable/Disable isolate this router from BGP perspective.
      name: isolate
    - description: Local AS number to be used within a VRF instance.
      name: local_as
    - description: Enable/Disable message logging for neighbor up/down event.
      name: log_neighbor_changes
    - description: Specify Maximum number of AS numbers allowed in the AS-path attribute. Valid values are between 1 and 512.
      name: maxas_limit
    - description: Enable/Disable handle BGP neighbor down event, due to various reasons.
      name: neighbor_down_fib_accelerate
    - description: The BGP reconnection interval for dropped sessions. Valid values are between 1 and 60.
      name: reconnect_interval
    - description: Router Identifier (ID) of the BGP router VRF instance.
      name: router_id
    - description: Administratively shutdown the BGP protocol.
      name: shutdown
    - description: Enable/Disable advertise only routes programmed in hardware to peers.
      name: suppress_fib_pending
    - description: Specify timeout for the first best path after a restart, in seconds.
      name: timer_bestpath_limit
    - description: Set BGP hold timer.
      name: timer_bgp_hold
    - description: Set BGP keepalive timer.
      name: timer_bgp_keepalive
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages BGP configuration.
    name: nxos-bgp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.
      name: asn
      required: true
    - description: Name of the VRF. The name 'default' is a valid VRF representing the global bgp.
      name: vrf
      required: true
    - auto: PREDEFINED
      description: Address Family Identifier.
      name: afi
      predefined:
      - ipv4
      - ipv6
      - vpnv4
      - vpnv6
      - l2vpn
      required: true
    - auto: PREDEFINED
      description: Sub Address Family Identifier.
      name: safi
      predefined:
      - unicast
      - multicast
      - evpn
      required: true
    - description: Install a backup path into the forwarding table and provide prefix independent convergence (PIC) in case of a PE-CE link failure.
      name: additional_paths_install
    - description: Enables the receive capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
      name: additional_paths_receive
    - description: Configures the capability of selecting additional paths for a prefix. Valid values are a string defining the name of the route-map.
      name: additional_paths_selection
    - description: Enables the send capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
      name: additional_paths_send
    - description: Advertise evpn routes.
      name: advertise_l2vpn_evpn
    - description: Configure client-to-client route reflection.
      name: client_to_client
    - description: Specify dampen value for IGP metric-related changes, in seconds. Valid values are integer and keyword 'default'.
      name: dampen_igp_metric
    - description: Enable/disable route-flap dampening.
      name: dampening_state
    - description: Specify decay half-life in minutes for route-flap dampening. Valid values are integer and keyword 'default'.
      name: dampening_half_time
    - description: Specify max suppress time for route-flap dampening stable route. Valid values are integer and keyword 'default'.
      name: dampening_max_suppress_time
    - description: Specify route reuse time for route-flap dampening. Valid values are integer and keyword 'default'.
      name: dampening_reuse_time
    - description: Specify route-map for route-flap dampening. Valid values are a string defining the name of the route-map.
      name: dampening_routemap
    - description: Specify route suppress time for route-flap dampening. Valid values are integer and keyword 'default'.
      name: dampening_suppress_time
    - description: Default information originate.
      name: default_information_originate
    - description: Sets default metrics for routes redistributed into BGP. Valid values are Integer or keyword 'default'
      name: default_metric
    - description: Sets the administrative distance for eBGP routes. Valid values are Integer or keyword 'default'.
      name: distance_ebgp
    - description: Sets the administrative distance for iBGP routes. Valid values are Integer or keyword 'default'.
      name: distance_ibgp
    - description: Sets the administrative distance for local BGP routes. Valid values are Integer or keyword 'default'.
      name: distance_local
    - description: An array of route-map names which will specify prefixes to inject. Each array entry must first specify the inject-map name, secondly an exist-map name, and optionally the copy-attributes keyword which indicates that attributes should be copied from the aggregate. For example [['lax_inject_map', 'lax_exist_map'], ['nyc_inject_map', 'nyc_exist_map', 'copy-attributes'], ['fsd_inject_map', 'fsd_exist_map']].
      name: inject_map
    - description: Configures the maximum number of equal-cost paths for load sharing. Valid value is an integer in the range 1-64.
      name: maximum_paths
    - description: Configures the maximum number of ibgp equal-cost paths for load sharing. Valid value is an integer in the range 1-64.
      name: maximum_paths_ibgp
    - description: Networks to configure. Valid value is a list of network prefixes to advertise. The list must be in the form of an array. Each entry in the array must include a prefix address and an optional route-map. For example [['10.0.0.0/16', 'routemap_LA'], ['192.168.1.1', 'Chicago'], ['192.168.2.0/24'], ['192.168.3.0/24', 'routemap_NYC']].
      name: networks
    - description: Configure a route-map for valid nexthops. Valid values are a string defining the name of the route-map.
      name: next_hop_route_map
    - description: A list of redistribute directives. Multiple redistribute entries are allowed. The list must be in the form of a nested array. the first entry of each array defines the source-protocol to redistribute from; the second entry defines a route-map name. A route-map is highly advised but may be optional on some platforms, in which case it may be omitted from the array list. For example [['direct', 'rm_direct'], ['lisp', 'rm_lisp']].
      name: redistribute
    - description: Advertises only active routes to peers.
      name: suppress_inactive
    - description: Apply table-map to filter routes downloaded into URIB. Valid values are a string.
      name: table_map
    - description: Filters routes rejected by the route-map and does not download them to the RIB.
      name: table_map_filter
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages BGP Address-family configuration.
    name: nxos-bgp-af
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: BGP autonomous system number. Valid values are string, Integer in ASPLAIN or ASDOT notation.
      name: asn
      required: true
    - defaultValue: default
      description: Name of the VRF. The name 'default' is a valid VRF representing the global bgp.
      name: vrf
    - description: Neighbor Identifier. Valid values are string. Neighbors may use IPv4 or IPv6 notation, with or without prefix length.
      name: neighbor
      required: true
    - description: Description of the neighbor.
      name: description
    - auto: PREDEFINED
      description: |-
        Enables/Disables BFD for a given neighbor.
        Dependency: 'feature bfd'
      name: bfd
      predefined:
      - enable
      - disable
    - description: Configure whether or not to check for directly connected peer.
      name: connected_check
    - description: Configure whether or not to negotiate capability with this neighbor.
      name: capability_negotiation
    - description: Configure whether or not to enable dynamic capability.
      name: dynamic_capability
    - description: Specify multihop TTL for a remote peer. Valid values are integers between 2 and 255, or keyword 'default' to disable this property.
      name: ebgp_multihop
    - description: Specify the local-as number for the eBGP neighbor. Valid values are String or Integer in ASPLAIN or ASDOT notation, or 'default', which means not to configure it.
      name: local_as
    - auto: PREDEFINED
      description: Specify whether or not to enable log messages for neighbor up/down event.
      name: log_neighbor_changes
      predefined:
      - enable
      - disable
      - inherit
    - description: Specify whether or not to shut down this neighbor under memory pressure.
      name: low_memory_exempt
    - description: Specify Maximum number of peers for this neighbor prefix Valid values are between 1 and 1000, or 'default', which does not impose the limit. Note that this parameter is accepted only on neighbors with address/prefix.
      name: maximum_peers
    - description: Specify the password for neighbor. Valid value is string.
      name: pwd
    - auto: PREDEFINED
      description: Specify the encryption type the password will use. Valid values are '3des' or 'cisco_type_7' encryption or keyword 'default'.
      name: pwd_type
      predefined:
      - 3des
      - cisco_type_7
      - default
    - description: Specify Autonomous System Number of the neighbor. Valid values are String or Integer in ASPLAIN or ASDOT notation, or 'default', which means not to configure it.
      name: remote_as
    - auto: PREDEFINED
      description: Specify the config to remove private AS number from outbound updates. Valid values are 'enable' to enable this config, 'disable' to disable this config, 'all' to remove all private AS number, or 'replace-as', to replace the private AS number.
      name: remove_private_as
      predefined:
      - enable
      - disable
      - all
      - replace-as
    - description: Configure to administratively shutdown this neighbor.
      name: shutdown
    - description: Configure to suppress 4-byte AS Capability.
      name: suppress_4_byte_as
    - description: Specify keepalive timer value. Valid values are integers between 0 and 3600 in terms of seconds, or 'default', which is 60.
      name: timers_keepalive
    - description: Specify holdtime timer value. Valid values are integers between 0 and 3600 in terms of seconds, or 'default', which is 180.
      name: timers_holdtime
    - description: Specify whether or not to only allow passive connection setup. Valid values are 'true', 'false', and 'default', which defaults to 'false'. This property can only be configured when the neighbor is in 'ip' address format without prefix length.
      name: transport_passive_only
    - description: Specify source interface of BGP session and updates.
      name: update_source
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages BGP neighbors configurations.
    name: nxos-bgp-neighbor
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.
      name: asn
      required: true
    - defaultValue: default
      description: Name of the VRF. The name 'default' is a valid VRF representing the global bgp.
      name: vrf
    - description: Neighbor Identifier. Valid values are string. Neighbors may use IPv4 or IPv6 notation, with or without prefix length.
      name: neighbor
      required: true
    - auto: PREDEFINED
      description: Address Family Identifier.
      name: afi
      predefined:
      - ipv4
      - ipv6
      - vpnv4
      - vpnv6
      - l2vpn
      required: true
    - auto: PREDEFINED
      description: Sub Address Family Identifier.
      name: safi
      predefined:
      - unicast
      - multicast
      - evpn
      required: true
    - auto: PREDEFINED
      description: Valid values are enable for basic command enablement; disable for disabling the command at the neighbor af level (it adds the disable keyword to the basic command); and inherit to remove the command at this level (the command value is inherited from a higher BGP layer).
      name: additional_paths_receive
      predefined:
      - enable
      - disable
      - inherit
    - auto: PREDEFINED
      description: Valid values are enable for basic command enablement; disable for disabling the command at the neighbor af level (it adds the disable keyword to the basic command); and inherit to remove the command at this level (the command value is inherited from a higher BGP layer).
      name: additional_paths_send
      predefined:
      - enable
      - disable
      - inherit
    - description: Conditional route advertisement. This property requires two route maps, an advertise-map and an exist-map. Valid values are an array specifying both the advertise-map name and the exist-map name, or simply 'default' e.g. ['my_advertise_map', 'my_exist_map']. This command is mutually exclusive with the advertise_map_non_exist property.
      name: advertise_map_exist
    - description: Conditional route advertisement. This property requires two route maps, an advertise-map and an exist-map. Valid values are an array specifying both the advertise-map name and the non-exist-map name, or simply 'default' e.g. ['my_advertise_map', 'my_non_exist_map']. This command is mutually exclusive with the advertise_map_exist property.
      name: advertise_map_non_exist
    - description: Activate allowas-in property
      name: allowas_in
    - description: Max-occurrences value for allowas_in. Valid values are an integer value or 'default'. This is mutually exclusive with allowas_in.
      name: allowas_in_max
    - description: Activate the as-override feature.
      name: as_override
    - description: Activate the default-originate feature.
      name: default_originate
    - description: Route-map for the default_originate property. Valid values are a string defining a route-map name, or 'default'. This is mutually exclusive with default_originate.
      name: default_originate_route_map
    - description: Disable checking of peer AS-number while advertising
      name: disable_peer_as_check
    - description: Valid values are a string defining a filter-list name, or 'default'.
      name: filter_list_in
    - description: Valid values are a string defining a filter-list name, or 'default'.
      name: filter_list_out
    - description: maximum-prefix limit value. Valid values are an integer value or 'default'.
      name: max_prefix_limit
    - description: Optional restart interval. Valid values are an integer. Requires max_prefix_limit. May not be combined with max_prefix_warning.
      name: max_prefix_interval
    - description: Optional threshold percentage at which to generate a warning. Valid values are an integer value. Requires max_prefix_limit.
      name: max_prefix_threshold
    - description: Optional warning-only keyword. Requires max_prefix_limit. May not be combined with max_prefix_interval.
      name: max_prefix_warning
    - description: Activate the next-hop-self feature.
      name: next_hop_self
    - description: Activate the next-hop-third-party feature.
      name: next_hop_third_party
    - description: Valid values are a string defining a prefix-list name, or 'default'.
      name: prefix_list_in
    - description: Valid values are a string defining a prefix-list name, or 'default'.
      name: prefix_list_out
    - description: Valid values are a string defining a route-map name, or 'default'.
      name: route_map_in
    - description: Valid values are a string defining a route-map name, or 'default'.
      name: route_map_out
    - description: Router reflector client.
      name: route_reflector_client
    - auto: PREDEFINED
      description: send-community attribute.
      name: send_community
      predefined:
      - none
      - both
      - extended
      - standard
      - default
    - auto: PREDEFINED
      description: Valid values are 'enable' for basic command enablement; 'always' to add the always keyword to the basic command; and 'inherit' to remove the command at this level (the command value is inherited from a higher BGP layer).
      name: soft_reconfiguration_in
      predefined:
      - enable
      - always
      - inherit
    - description: Site-of-origin. Valid values are a string defining a VPN extcommunity or 'default'.
      name: soo
    - description: suppress-inactive feature.
      name: suppress_inactive
    - description: unsuppress-map. Valid values are a string defining a route-map name or 'default'.
      name: unsuppress_map
    - description: Weight value. Valid values are an integer value or 'default'.
      name: weight
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages BGP address-family's neighbors configuration.
    name: nxos-bgp-neighbor-af
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: |-
        The commands to send to the remote NXOS device.  The resulting output from the command is returned.  If the `wait_for` argument is provided, the module is not returned until the condition is satisfied or the number of retires as expired.
        The `commands` argument also accepts an alternative form that allows for complex values that specify the command to run and the output format to return.   This can be done on a command by command basis.  The complex argument supports the keywords `command` and `output` where `command` is the command to run and `output` is one of 'text' or 'json'.
      name: commands
      required: true
    - description: Specifies what to evaluate from the output of the command and what conditionals to apply.  This argument will cause the task to wait for a particular conditional to be true before moving forward.   If the conditional is not true by the configured retries, the task fails.  See examples.
      name: wait_for
    - defaultValue: all
      description: The `match` argument is used in conjunction with the `wait_for` argument to specify the match policy.  Valid values are `all` or `any`.  If the value is set to `all` then all conditionals in the `wait_for` must be satisfied.  If the value is set to `any` then only one of the values must be satisfied.
      name: match
    - defaultValue: "10"
      description: Specifies the number of retries a command should by tried before it is considered failed.  The command is run on the target device every retry and evaluated against the `wait_for` conditionals.
      name: retries
    - defaultValue: "1"
      description: Configures the interval in seconds to wait between retries of the command.  If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again.
      name: interval
    description: Run arbitrary command on Cisco NXOS devices
    name: nxos-command
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The ordered set of commands that should be configured in the section.  The commands must be the exact same commands as found in the device running-config.  Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser.
      name: lines
    - description: The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against.  If the parents argument is omitted, the commands are checked against the set of top level or global commands.
      name: parents
    - description: The `src` argument provides a path to the configuration file to load into the remote system.  The path can either be a full system path to the configuration file if the value starts with / or relative to the root of the implemented role or playbook. This argument is mutually exclusive with the `lines` and `parents` arguments.
      name: src
    - description: The `replace_src` argument provides path to the configuration file to load into the remote system. This argument is used to replace the entire config with a flat-file. This is used with argument `replace` with value `config`. This is mutually exclusive with the `lines` and `src` arguments. This argument is supported on Nexus 9K device. Use `nxos_file_copy` module to copy the flat file to remote device and then use the path with this argument.
      name: replace_src
    - description: The ordered set of commands to push on to the command stack if a change needs to be made.  This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system.
      name: before
    - description: The ordered set of commands to append to the end of the command stack if a change needs to be made.  Just like with `before` this allows the playbook designer to append a set of commands to be executed after the command set.
      name: after
    - auto: PREDEFINED
      defaultValue: line
      description: Instructs the module on the way to perform the matching of the set of commands against the current device config.  If match is set to `line`, commands are matched line by line.  If match is set to `strict`, command lines are matched with respect to position.  If match is set to `exact`, command lines must be an equal match.  Finally, if match is set to `none`, the module will not attempt to compare the source configuration with the running configuration on the remote device.
      name: match
      predefined:
      - line
      - strict
      - exact
      - none
    - auto: PREDEFINED
      defaultValue: line
      description: Instructs the module on the way to perform the configuration on the device.  If the replace argument is set to `line` then the modified lines are pushed to the device in configuration mode.  If the replace argument is set to `block` then the entire command block is pushed to the device in configuration mode if any line is not correct. replace `config` is supported only on Nexus 9K device.
      name: replace
      predefined:
      - line
      - block
      - config
    - defaultValue: "no"
      description: This argument will cause the module to create a full backup of the current `running-config` from the remote device before any changes are made. If the `backup_options` value is not given, the backup file is written to the `backup` folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
      name: backup
    - description: The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The `running_config` argument allows the implementer to pass in the configuration to use as the base config for comparison.
      name: running_config
    - defaultValue: "no"
      description: The `defaults` argument will influence how the running-config is collected from the device.  When the value is set to true, the command used to collect the running-config is append with the all keyword.  When the value is set to false, the command is issued without the all keyword
      name: defaults
    - auto: PREDEFINED
      defaultValue: never
      description: When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default.  Using this argument will change that before.  If the argument is set to `always`, then the running-config will always be copied to the startup-config and the `modified` flag will always be set to True.  If the argument is set to `modified`, then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config.  If the argument is set to `never`, the running-config will never be copied to the startup-config.  If the argument is set to `changed`, then the running-config will only be copied to the startup-config if the task has made a change. `changed` was added in Ansible 2.6.
      name: save_when
      predefined:
      - always
      - never
      - modified
      - changed
    - auto: PREDEFINED
      defaultValue: startup
      description: |-
        When using the `ansible-playbook --diff` command line argument the module can generate diffs against different sources.
        When this option is configure as `startup`, the module will return the diff of the running-config against the startup-config.
        When this option is configured as `intended`, the module will return the diff of the running-config against the configuration provided in the `intended_config` argument.
        When this option is configured as `running`, the module will return the before and after diff of the running-config with respect to any changes made to the device configuration.
      name: diff_against
      predefined:
      - startup
      - intended
      - running
    - description: Use this argument to specify one or more lines that should be ignored during the diff.  This is used for lines in the configuration that are automatically updated by the system.  This argument takes a list of regular expressions or exact line matches.
      name: diff_ignore_lines
    - description: The `intended_config` provides the master configuration that the node should conform to and is used to check the final running-config against.   This argument will not modify any settings on the remote device and is strictly used to check the compliance of the current device's configuration against.  When specifying this argument, the task should also modify the `diff_against` value and set it to `intended`.
      name: intended_config
    - description: This is a dict object containing configurable options related to backup file path. The value of this option is read only when `backup` is set to `True`, if `backup` is set to `false` this option will be silently ignored.
      isArray: true
      name: backup_options
    description: Manage Cisco NXOS configuration sections
    name: nxos-config
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: EVPN control plane.
      name: nv_overlay_evpn
      required: true
    description: Handles the EVPN control plane for VXLAN.
    name: nxos-evpn-global
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The EVPN VXLAN Network Identifier.
      name: vni
      required: true
    - description: The VPN Route Distinguisher (RD). The RD is combined with the IPv4 or IPv6 prefix learned by the PE router to create a globally unique address.
      name: route_distinguisher
      required: true
    - description: Enables/Disables route-target settings for both import and export target communities using a single property.
      name: route_target_both
    - description: Sets the route-target 'import' extended communities.
      name: route_target_import
    - description: Sets the route-target 'export' extended communities.
      name: route_target_export
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages Cisco EVPN VXLAN Network Identifier (VNI).
    name: nxos-evpn-vni
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - defaultValue: '!config'
      description: When supplied, this argument will restrict the facts collected to a given subset.  Possible values for this argument include all, hardware, config, legacy, and interfaces.  Can specify a list of values to include a larger subset.  Values can also be used with an initial `M(!`) to specify that a specific subset should not be collected.
      name: gather_subset
    - description: When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all and the resources like interfaces, vlans etc. Can specify a list of values to include a larger subset. Values can also be used with an initial `M(!`) to specify that a specific subset should not be collected. Valid subsets are 'all', 'bfd_interfaces', 'lag_interfaces', 'telemetry', 'vlans', 'lacp', 'lacp_interfaces', 'interfaces', 'l3_interfaces', 'l2_interfaces', 'lldp_global'.
      name: gather_network_resources
    description: Gets facts about NX-OS switches
    name: nxos-facts
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of feature.
      name: feature
      required: true
    - auto: PREDEFINED
      defaultValue: enabled
      description: Desired state of the feature.
      name: state
      predefined:
      - enabled
      - disabled
    description: Manage features in NX-OS switches.
    name: nxos-feature
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: When `system_mode_maintenance=true` it puts all enabled protocols in maintenance mode (using the isolate command). When `system_mode_maintenance=false` it puts all enabled protocols in normal mode (using the no isolate command).
      name: system_mode_maintenance
    - description: When `system_mode_maintenance_dont_generate_profile=true` it prevents the dynamic searching of enabled protocols and executes commands configured in a maintenance-mode profile. Use this option if you want the system to use a maintenance-mode profile that you have created. When `system_mode_maintenance_dont_generate_profile=false` it prevents the dynamic searching of enabled protocols and executes commands configured in a normal-mode profile. Use this option if you want the system to use a normal-mode profile that you have created.
      name: system_mode_maintenance_dont_generate_profile
    - description: Keeps the switch in maintenance mode for a specified number of minutes. Range is 5-65535.
      name: system_mode_maintenance_timeout
    - description: Shuts down all protocols, vPC domains, and interfaces except the management interface (using the shutdown command). This option is disruptive while `system_mode_maintenance` (which uses the isolate command) is not.
      name: system_mode_maintenance_shutdown
    - auto: PREDEFINED
      description: Boots the switch into maintenance mode automatically in the event of a specified system crash. Note that not all reset reasons are applicable for all platforms. Also if reset reason is set to match_any, it is not idempotent as it turns on all reset reasons. If reset reason is match_any and state is absent, it turns off all the reset reasons.
      name: system_mode_maintenance_on_reload_reset_reason
      predefined:
      - hw_error
      - svc_failure
      - kern_failure
      - wdog_timeout
      - fatal_error
      - lc_failure
      - match_any
      - manual_reload
      - any_other
      - maintenance
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
      required: true
    description: Trigger a graceful removal or insertion (GIR) of the switch.
    name: nxos-gir
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: List of commands to be included into the profile.
      name: commands
    - auto: PREDEFINED
      description: Configure the profile as Maintenance or Normal mode.
      name: mode
      predefined:
      - maintenance
      - normal
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Create a maintenance-mode or normal-mode profile for GIR.
    name: nxos-gir-profile-management
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: HSRP group number.
      name: group
      required: true
    - description: Full name of interface that is being managed for HSRP.
      name: interface
      required: true
    - auto: PREDEFINED
      defaultValue: "1"
      description: HSRP version.
      name: version
      predefined:
      - "1"
      - "2"
    - description: HSRP priority or keyword 'default'.
      name: priority
    - auto: PREDEFINED
      description: Enable/Disable preempt.
      name: preempt
      predefined:
      - enabled
      - disabled
    - description: HSRP virtual IP address or keyword 'default'
      name: vip
    - description: Authentication string. If this needs to be hidden(for md5 type), the string should be 7 followed by the key string. Otherwise, it can be 0 followed by key string or just key string (for backward compatibility). For text type, this should be just be a key string. if this is 'default', authentication is removed.
      name: auth_string
    - auto: PREDEFINED
      description: Authentication type.
      name: auth_type
      predefined:
      - text
      - md5
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages HSRP configuration on NX-OS switches.
    name: nxos-hsrp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Removes routes when the IGMP process is restarted. By default, routes are not flushed.
      name: flush_routes
    - description: Enables or disables the enforce router alert option check for IGMPv2 and IGMPv3 packets.
      name: enforce_rtr_alert
    - description: Restarts the igmp process (using an exec config command).
      name: restart
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - default
    description: Manages IGMP global configuration.
    name: nxos-igmp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The full interface name for IGMP configuration. e.g. `Ethernet1/2`.
      name: interface
      required: true
    - auto: PREDEFINED
      description: IGMP version. It can be 2 or 3 or keyword 'default'.
      name: version
      predefined:
      - "2"
      - "3"
      - default
    - description: Query interval used when the IGMP process starts up. The range is from 1 to 18000 or keyword 'default'. The default is 31.
      name: startup_query_interval
    - description: Query count used when the IGMP process starts up. The range is from 1 to 10 or keyword 'default'. The default is 2.
      name: startup_query_count
    - description: Sets the robustness variable. Values can range from 1 to 7 or keyword 'default'. The default is 2.
      name: robustness
    - description: Sets the querier timeout that the software uses when deciding to take over as the querier. Values can range from 1 to 65535 seconds or keyword 'default'. The default is 255 seconds.
      name: querier_timeout
    - description: Sets the response time advertised in IGMP queries. Values can range from 1 to 25 seconds or keyword 'default'. The default is 10 seconds.
      name: query_mrt
    - description: Sets the frequency at which the software sends IGMP host query messages. Values can range from 1 to 18000 seconds or keyword 'default'. The default is 125 seconds.
      name: query_interval
    - description: Sets the query interval waited after sending membership reports before the software deletes the group state. Values can range from 1 to 25 seconds or keyword 'default'. The default is 1 second.
      name: last_member_qrt
    - description: Sets the number of times that the software sends an IGMP query in response to a host leave message. Values can range from 1 to 5 or keyword 'default'. The default is 2.
      name: last_member_query_count
    - description: Sets the group membership timeout for IGMPv2. Values can range from 3 to 65,535 seconds or keyword 'default'. The default is 260 seconds.
      name: group_timeout
    - description: Configures report-link-local-groups. Enables sending reports for groups in 224.0.0.0/24. Reports are always sent for nonlink local groups. By default, reports are not sent for link local groups.
      name: report_llg
    - description: Enables the device to remove the group entry from the multicast routing table immediately upon receiving a leave message for the group. Use this command to minimize the leave latency of IGMPv2 group memberships on a given IGMP interface because the device does not send group-specific queries. The default is disabled.
      name: immediate_leave
    - description: Configure a routemap for static outgoing interface (OIF) or keyword 'default'.
      name: oif_routemap
    - description: This argument is deprecated, please use oif_ps instead. Configure a prefix for static outgoing interface (OIF).
      name: oif_prefix
    - description: This argument is deprecated, please use oif_ps instead. Configure a source for static outgoing interface (OIF).
      name: oif_source
    - description: Configure prefixes and sources for static outgoing interface (OIF). This is a list of dict where each dict has source and prefix defined or just prefix if source is not needed. The specified values will be configured on the device and if any previous prefix/sources exist, they will be removed. Keyword 'default' is also accepted which removes all existing prefix/sources.
      name: oif_ps
    - defaultValue: "False"
      description: Restart IGMP. This is NOT idempotent as this is action only.
      name: restart
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - absent
      - default
    description: Manages IGMP interface configuration.
    name: nxos-igmp-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Enables/disables IGMP snooping on the switch.
      name: snooping
    - description: Group membership timeout value for all VLANs on the device. Accepted values are integer in range 1-10080, `never` and `default`.
      name: group_timeout
    - description: Global link-local groups suppression.
      name: link_local_grp_supp
    - description: Global IGMPv1/IGMPv2 Report Suppression.
      name: report_supp
    - description: Global IGMPv3 Report Suppression and Proxy Reporting.
      name: v3_report_supp
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - default
    description: Manages IGMP snooping global configuration.
    name: nxos-igmp-snooping
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the system (or combined) image file on flash.
      name: system_image_file
      required: true
    - description: Name of the kickstart image file on flash. (Not required on all Nexus platforms)
      name: kickstart_image_file
    - auto: PREDEFINED
      defaultValue: "no"
      description: |-
        Upgrade using In Service Software Upgrade (ISSU). (Supported on N5k, N7k, N9k platforms)
        Selecting 'required' or 'yes' means that upgrades will only proceed if the switch is capable of ISSU.
        Selecting 'desired' means that upgrades will use ISSU if possible but will fall back to disruptive upgrade if needed.
        Selecting 'no' means do not use ISSU. Forced disruptive.
      name: issu
      predefined:
      - required
      - desired
      - "yes"
      - "no"
    description: Set boot options like boot, kickstart image and issu.
    name: nxos-install-os
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of this cisco_interface resource. Valid value is a string.
      name: interface
      required: true
    - description: Name of the ospf instance.
      name: ospf
      required: true
    - description: Ospf area associated with this cisco_interface_ospf instance. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer.
      name: area
      required: true
    - auto: PREDEFINED
      description: |-
        Enables bfd at interface level. This overrides the bfd variable set at the ospf router level.
        Valid values are 'enable', 'disable' or 'default'.
        Dependency: 'feature bfd'
      name: bfd
      predefined:
      - enable
      - disable
      - default
    - description: The cost associated with this cisco_interface_ospf instance.
      name: cost
    - description: Time between sending successive hello packets. Valid values are an integer or the keyword 'default'.
      name: hello_interval
    - description: Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer or the keyword 'default'.
      name: dead_interval
    - description: Enable or disable passive-interface state on this interface. true - (enable) Prevent OSPF from establishing an adjacency or sending routing updates on this interface. false - (disable) Override global 'passive-interface default' for this interface.
      name: passive_interface
    - auto: PREDEFINED
      description: Specifies interface ospf network type. Valid values are 'point-to-point' or 'broadcast'.
      name: network
      predefined:
      - point-to-point
      - broadcast
    - description: Enables or disables the usage of message digest authentication.
      name: message_digest
    - description: Md5 authentication key-id associated with the ospf instance. If this is present, message_digest_encryption_type, message_digest_algorithm_type and message_digest_password are mandatory. Valid value is an integer and 'default'.
      name: message_digest_key_id
    - auto: PREDEFINED
      description: Algorithm used for authentication among neighboring routers within an area. Valid values are 'md5' and 'default'.
      name: message_digest_algorithm_type
      predefined:
      - md5
      - default
    - auto: PREDEFINED
      description: Specifies the scheme used for encrypting message_digest_password. Valid values are '3des' or 'cisco_type_7' encryption or 'default'.
      name: message_digest_encryption_type
      predefined:
      - cisco_type_7
      - 3des
      - default
    - description: Specifies the message_digest password. Valid value is a string.
      name: message_digest_password
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages configuration of an OSPF interface instance.
    name: nxos-interface-ospf
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A dictionary of interface options
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manages interface attributes of NX-OS Interfaces
    name: nxos-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A dictionary of Layer-2 interface options
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manages Layer-2 Interfaces attributes of NX-OS Interfaces
    name: nxos-l2-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A dictionary of Layer-3 interface options
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manages Layer-3 Interfaces attributes of NX-OS Interfaces
    name: nxos-l3-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: LACP global options.
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - deleted
    description: Manage Global Link Aggregation Control Protocol (LACP) on Cisco NX-OS devices.
    name: nxos-lacp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A dictionary of LACP interfaces options.
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manage Link Aggregation Control Protocol (LACP) attributes of interfaces on Cisco NX-OS devices.
    name: nxos-lacp-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A list of link aggregation group configurations.
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Manages link aggregation groups of NX-OS Interfaces
    name: nxos-lag-interfaces
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: State of the LLDP configuration. If value is `present` lldp will be enabled else if it is `absent` it will be disabled.
      name: state
      predefined:
      - present
      - absent
    description: Manage LLDP configuration on Cisco NXOS network devices.
    name: nxos-lldp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A list of link layer discovery configurations
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion
      name: state
      predefined:
      - merged
      - replaced
      - deleted
    description: Configure and manage Link Layer Discovery Protocol(LLDP) attributes on NX-OS platforms.
    name: nxos-lldp-global
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Destination of the logs.
      name: dest
      predefined:
      - console
      - logfile
      - module
      - monitor
      - server
    - description: Hostname or IP Address for remote logging (when dest is 'server').
      name: remote_server
    - description: VRF to be used while configuring remote logging (when dest is 'server').
      name: use_vrf
    - description: Interface to be used while configuring source-interface for logging (e.g., 'Ethernet1/2', 'mgmt0')
      name: interface
    - description: If value of `dest` is `logfile` it indicates file-name.
      name: name
    - description: Facility name for logging.
      name: facility
    - description: Set logging severity levels.
      name: dest_level
    - description: Set logging severity levels for facility based log messages.
      name: facility_level
    - description: List of logging definitions.
      name: aggregate
    - auto: PREDEFINED
      defaultValue: present
      description: State of the logging configuration.
      name: state
      predefined:
      - present
      - absent
    - auto: PREDEFINED
      description: Link/trunk enable/default interface configuration logging
      name: event
      predefined:
      - link-enable
      - link-default
      - trunk-enable
      - trunk-default
    - auto: PREDEFINED
      description: Add interface description to interface syslogs. Does not work with version 6.0 images using nxapi as a transport.
      name: interface_message
      predefined:
      - add-interface-description
    - description: Set logfile size
      name: file_size
    - auto: PREDEFINED
      description: Set logging facility ethpm link status. Not idempotent with version 6.0 images.
      name: facility_link_status
      predefined:
      - link-down-notif
      - link-down-error
      - link-up-notif
      - link-up-error
    - auto: PREDEFINED
      description: Set logging timestamp format
      name: timestamp
      predefined:
      - microseconds
      - milliseconds
      - seconds
    - defaultValue: "False"
      description: Remove any switch logging configuration that does not match what has been configured Not supported for ansible_connection local. All nxos-logging tasks must use the same ansible_connection type.
      name: purge
    description: Manage logging on network devices
    name: nxos-logging
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Network address of NTP server.
      name: server
    - description: Network address of NTP peer.
      name: peer
    - description: Authentication key identifier to use with given NTP server or peer or keyword 'default'.
      name: key_id
    - auto: PREDEFINED
      description: Makes given NTP server or peer the preferred NTP server or peer for the device.
      name: prefer
      predefined:
      - enabled
      - disabled
    - description: Makes the device communicate with the given NTP server or peer over a specific VRF or keyword 'default'.
      name: vrf_name
    - description: Local source address from which NTP messages are sent or keyword 'default'
      name: source_addr
    - description: Local source interface from which NTP messages are sent. Must be fully qualified interface name or keyword 'default'
      name: source_int
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages core NTP configuration.
    name: nxos-ntp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Authentication key identifier (numeric).
      name: key_id
    - description: MD5 String.
      name: md5string
    - auto: PREDEFINED
      defaultValue: text
      description: Whether the given md5string is in cleartext or has been encrypted. If in cleartext, the device will encrypt it before storing it.
      name: auth_type
      predefined:
      - text
      - encrypt
    - auto: PREDEFINED
      defaultValue: "false"
      description: Whether the given key is required to be supplied by a time source for the device to synchronize to the time source.
      name: trusted_key
      predefined:
      - "false"
      - "true"
    - auto: PREDEFINED
      description: Turns NTP authentication on or off.
      name: authentication
      predefined:
      - "on"
      - "off"
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages NTP authentication.
    name: nxos-ntp-auth
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Sets whether the device is an authoritative NTP server.
      name: master
    - description: If `master=true`, an optional stratum can be supplied (1-15). The device default is 8.
      name: stratum
    - description: Sets whether NTP logging is enabled on the device.
      name: logging
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages NTP options.
    name: nxos-ntp-options
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - defaultValue: "80"
      description: Configure the port with which the HTTP server will listen on for requests.  By default, NXAPI will bind the HTTP service to the standard HTTP port 80.  This argument accepts valid port values in the range of 1 to 65535.
      name: http_port
    - defaultValue: "True"
      description: Controls the operating state of the HTTP protocol as one of the underlying transports for NXAPI.  By default, NXAPI will enable the HTTP transport when the feature is first configured.  To disable the use of the HTTP transport, set the value of this argument to False.
      name: http
    - defaultValue: "443"
      description: Configure the port with which the HTTPS server will listen on for requests.  By default, NXAPI will bind the HTTPS service to the standard HTTPS port 443.  This argument accepts valid port values in the range of 1 to 65535.
      name: https_port
    - defaultValue: "False"
      description: Controls the operating state of the HTTPS protocol as one of the underlying transports for NXAPI.  By default, NXAPI will disable the HTTPS transport when the feature is first configured.  To enable the use of the HTTPS transport, set the value of this argument to True.
      name: https
    - defaultValue: "False"
      description: The NXAPI feature provides a web base UI for developers for entering commands.  This feature is initially disabled when the NXAPI feature is configured for the first time.  When the `sandbox` argument is set to True, the developer sandbox URL will accept requests and when the value is set to False, the sandbox URL is unavailable. This is supported on NX-OS 7K series.
      name: sandbox
    - auto: PREDEFINED
      defaultValue: present
      description: The `state` argument controls whether or not the NXAPI feature is configured on the remote device.  When the value is `present` the NXAPI feature configuration is present in the device running-config.  When the values is `absent` the feature configuration is removed from the running-config.
      name: state
      predefined:
      - present
      - absent
    - defaultValue: "False"
      description: Controls the use of whether strong or weak ciphers are configured. By default, this feature is disabled and weak ciphers are configured.  To enable the use of strong ciphers, set the value of this argument to True.
      name: ssl_strong_ciphers
    - defaultValue: "True"
      description: Controls the use of the Transport Layer Security version 1.0 is configured.  By default, this feature is enabled.  To disable the use of TLSV1.0, set the value of this argument to True.
      name: tlsv1_0
    - defaultValue: "False"
      description: Controls the use of the Transport Layer Security version 1.1 is configured.  By default, this feature is disabled.  To enable the use of TLSV1.1, set the value of this argument to True.
      name: tlsv1_1
    - defaultValue: "False"
      description: Controls the use of the Transport Layer Security version 1.2 is configured.  By default, this feature is disabled.  To enable the use of TLSV1.2, set the value of this argument to True.
      name: tlsv1_2
    description: Manage NXAPI configuration on an NXOS device.
    name: nxos-nxapi
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the ospf instance.
      name: ospf
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages configuration of an ospf instance.
    name: nxos-ospf
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - defaultValue: default
      description: Name of the resource instance. Valid value is a string. The name 'default' is a valid VRF representing the global OSPF.
      name: vrf
    - description: Name of the OSPF instance.
      name: ospf
      required: true
    - description: Router Identifier (ID) of the OSPF router VRF instance.
      name: router_id
    - description: Specify the default Metric value. Valid values are an integer or the keyword 'default'.
      name: default_metric
    - auto: PREDEFINED
      description: Controls the level of log messages generated whenever a neighbor changes state. Valid values are 'log', 'detail', and 'default'.
      name: log_adjacency
      predefined:
      - log
      - detail
      - default
    - description: Specify the start interval for rate-limiting Link-State Advertisement (LSA) generation. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_lsa_start
    - description: Specify the hold interval for rate-limiting Link-State Advertisement (LSA) generation. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_lsa_hold
    - description: Specify the max interval for rate-limiting Link-State Advertisement (LSA) generation. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_lsa_max
    - description: Specify initial Shortest Path First (SPF) schedule delay. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_spf_start
    - description: Specify minimum hold time between Shortest Path First (SPF) calculations. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_spf_hold
    - description: Specify the maximum wait time between Shortest Path First (SPF) calculations. Valid values are an integer, in milliseconds, or the keyword 'default'.
      name: timer_throttle_spf_max
    - description: Specifies the reference bandwidth used to assign OSPF cost. Valid values are an integer, in Mbps, or the keyword 'default'.
      name: auto_cost
    - auto: PREDEFINED
      description: |-
        Enables BFD on all OSPF interfaces.
        Dependency: 'feature bfd'
      name: bfd
      predefined:
      - enable
      - disable
    - description: Setting to `yes` will suppress routing update on interface.
      name: passive_interface
    - auto: PREDEFINED
      defaultValue: present
      description: State of ospf vrf configuration.
      name: state
      predefined:
      - present
      - absent
    description: Manages a VRF for an OSPF router.
    name: nxos-ospf-vrf
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Anycast gateway mac of the switch.
      name: anycast_gateway_mac
      required: true
    description: Configures anycast gateway MAC of the switch.
    name: nxos-overlay-global
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: |-
        Enables BFD on all PIM interfaces.
        Dependency: 'feature bfd'
      name: bfd
      predefined:
      - enable
      - disable
    - description: Configure group ranges for Source Specific Multicast (SSM). Valid values are multicast addresses or the keyword `none` or keyword `default`. `none` removes all SSM group ranges. `default` will set ssm_range to the default multicast address. If you set multicast address, please ensure that it is not the same as the `default`, otherwise use the `default` option.
      name: ssm_range
      required: true
    description: Manages configuration of a PIM instance.
    name: nxos-pim
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Full name of the interface such as Ethernet1/33.
      name: interface
      required: true
    - defaultValue: "False"
      description: Enable/disable sparse-mode on the interface.
      name: sparse
    - auto: PREDEFINED
      description: |-
        Enables BFD for PIM at the interface level. This overrides the bfd variable set at the pim global level.
        Valid values are 'enable', 'disable' or 'default'.
        Dependency: 'feature bfd'
      name: bfd
      predefined:
      - enable
      - disable
      - default
    - description: Configures priority for PIM DR election on interface.
      name: dr_prio
    - description: Authentication for hellos on this interface.
      name: hello_auth_key
    - description: Hello interval in milliseconds for this interface.
      name: hello_interval
    - description: Policy for join-prune messages (outbound).
      name: jp_policy_out
    - description: Policy for join-prune messages (inbound).
      name: jp_policy_in
    - auto: PREDEFINED
      description: Type of policy mapped to `jp_policy_out`.
      name: jp_type_out
      predefined:
      - prefix
      - routemap
    - auto: PREDEFINED
      description: Type of policy mapped to `jp_policy_in`.
      name: jp_type_in
      predefined:
      - prefix
      - routemap
    - defaultValue: "False"
      description: Configures interface to be a boundary of a PIM domain.
      name: border
    - description: Configures a neighbor policy for filtering adjacencies.
      name: neighbor_policy
    - auto: PREDEFINED
      description: Type of policy mapped to neighbor_policy.
      name: neighbor_type
      predefined:
      - prefix
      - routemap
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - default
    description: Manages PIM interface configuration.
    name: nxos-pim-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Configures a Protocol Independent Multicast (PIM) static rendezvous point (RP) address. Valid values are unicast addresses.
      name: rp_address
      required: true
    - description: Group range for static RP. Valid values are multicast addresses.
      name: group_list
    - description: Prefix list policy for static RP. Valid values are prefix-list policy names.
      name: prefix_list
    - description: Route map policy for static RP. Valid values are route-map policy names.
      name: route_map
    - description: Group range is treated in PIM bidirectional mode.
      name: bidir
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
      - default
      required: true
    description: Manages configuration of an PIM static RP address instance.
    name: nxos-pim-rp-address
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: IP address or hostname (resolvable by switch) of remote node.
      name: dest
      required: true
    - defaultValue: "5"
      description: Number of packets to send.
      name: count
    - description: Source IP Address or hostname (resolvable by switch)
      name: source
    - description: Outgoing VRF.
      name: vrf
    - auto: PREDEFINED
      defaultValue: present
      description: Determines if the expected result is success or fail.
      name: state
      predefined:
      - absent
      - present
    description: Tests reachability using ping from Nexus switch.
    name: nxos-ping
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - defaultValue: "False"
      description: Safeguard boolean. Set to true if you're sure you want to reboot.
      name: confirm
    description: Reboot a network device.
    name: nxos-reboot
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of checkpoint file to create. Mutually exclusive with rollback_to.
      name: checkpoint_file
    - description: Name of checkpoint file to rollback to. Mutually exclusive with checkpoint_file.
      name: rollback_to
    description: Set a checkpoint or rollback to a checkpoint.
    name: nxos-rollback
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the RPM package.
      name: pkg
      required: true
    - defaultValue: bootflash
      description: The remote file system of the device. If omitted, devices that support a file_system parameter will use their default values.
      name: file_system
    - description: List of RPM/patch definitions.
      name: aggregate
    - auto: PREDEFINED
      defaultValue: present
      description: If the state is present, the rpm will be installed, If the state is absent, it will be removed.
      name: state
      predefined:
      - present
      - absent
    description: Install patch or feature rpms on Cisco NX-OS devices.
    name: nxos-rpm
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the remote package.
      name: pkg
      required: true
    - description: The remote file system of the device. If omitted, devices that support a file_system parameter will use their default values.
      name: file_system
    description: Perform SMUs on Cisco NX-OS devices.
    name: nxos-smu
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Define what snapshot action the module would perform.
      name: action
      predefined:
      - add
      - compare
      - create
      - delete
      - delete_all
      required: true
    - description: Snapshot name, to be used when `action=create` or `action=delete`.
      name: snapshot_name
    - description: Snapshot description to be used when `action=create`.
      name: description
    - description: First snapshot to be used when `action=compare`.
      name: snapshot1
    - description: Second snapshot to be used when `action=compare`.
      name: snapshot2
    - description: Name of the file where snapshots comparison will be stored when `action=compare`.
      name: comparison_results_file
    - auto: PREDEFINED
      description: Snapshot options to be used when `action=compare`.
      name: compare_option
      predefined:
      - summary
      - ipv4routes
      - ipv6routes
    - description: Used to name the show command output, to be used when `action=add`.
      name: section
    - description: Specify a new show command, to be used when `action=add`.
      name: show_command
    - description: Specifies the tag of each row entry of the show command's XML output, to be used when `action=add`.
      name: row_id
    - description: Specify the tags used to distinguish among row entries, to be used when `action=add`.
      name: element_key1
    - description: Specify the tags used to distinguish among row entries, to be used when `action=add`.
      name: element_key2
    - defaultValue: "no"
      description: Specify to locally store a new created snapshot, to be used when `action=create`.
      name: save_snapshot_locally
    - defaultValue: ./
      description: Specify the path of the file where new created snapshot or snapshots comparison will be stored, to be used when `action=create` and `save_snapshot_locally=true` or `action=compare`.
      name: path
    description: Manage snapshots of the running states of selected features.
    name: nxos-snapshot
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Case-sensitive community string.
      name: community
      required: true
    - auto: PREDEFINED
      description: Access type for community.
      name: access
      predefined:
      - ro
      - rw
    - description: Group to which the community belongs.
      name: group
    - description: ACL name to filter snmp requests or keyword 'default'.
      name: acl
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages SNMP community configs.
    name: nxos-snmp-community
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Contact information.
      name: contact
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
      required: true
    description: Manages SNMP contact info.
    name: nxos-snmp-contact
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: IP address of hostname of target host.
      name: snmp_host
      required: true
    - auto: PREDEFINED
      description: SNMP version. If this is not specified, v1 is used.
      name: version
      predefined:
      - v1
      - v2c
      - v3
    - auto: PREDEFINED
      description: Use this when verion is v3. SNMPv3 Security level.
      name: v3
      predefined:
      - noauth
      - auth
      - priv
    - description: Community string or v3 username.
      name: community
    - defaultValue: "162"
      description: UDP port number (0-65535).
      name: udp
    - auto: PREDEFINED
      description: type of message to send to host. If this is not specified, trap type is used.
      name: snmp_type
      predefined:
      - trap
      - inform
    - description: VRF to use to source traffic to source. If state = absent, the vrf is removed.
      name: vrf
    - description: Name of VRF to filter. If state = absent, the vrf is removed from the filter.
      name: vrf_filter
    - description: Source interface. Must be fully qualified interface name. If state = absent, the interface is removed.
      name: src_intf
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource. If state = present, the host is added to the configuration. If only vrf and/or vrf_filter and/or src_intf are given, they will be added to the existing host configuration. If state = absent, the host is removed if community parameter is given. It is possible to remove only vrf and/or src_int and/or vrf_filter by providing only those parameters and no community parameter.
      name: state
      predefined:
      - present
      - absent
    description: Manages SNMP host configuration.
    name: nxos-snmp-host
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Location information.
      name: location
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages SNMP location information.
    name: nxos-snmp-location
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Case sensitive group.
      name: group
      predefined:
      - aaa
      - bfd
      - bgp
      - bridge
      - callhome
      - cfs
      - config
      - eigrp
      - entity
      - feature-control
      - generic
      - hsrp
      - license
      - link
      - lldp
      - mmode
      - ospf
      - pim
      - rf
      - rmon
      - snmp
      - storm-control
      - stpx
      - switchfabric
      - syslog
      - sysmgr
      - system
      - upgrade
      - vtp
      - all
      required: true
    - auto: PREDEFINED
      defaultValue: enabled
      description: Manage the state of the resource.
      name: state
      predefined:
      - enabled
      - disabled
    description: Manages SNMP traps.
    name: nxos-snmp-traps
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the user.
      name: user
      required: true
    - description: Group to which the user will belong to. If state = present, and the user is existing, the group is added to the user. If the user is not existing, user entry is created with this group argument. If state = absent, only the group is removed from the user entry. However, to maintain backward compatibility, if the existing user belongs to only one group, and if group argument is same as the existing user's group, then the user entry also is deleted.
      name: group
    - auto: PREDEFINED
      description: Authentication parameters for the user.
      name: authentication
      predefined:
      - md5
      - sha
    - description: Authentication password when using md5 or sha. This is not idempotent
      name: pwd
    - description: Privacy password for the user. This is not idempotent
      name: privacy
    - description: Enables AES-128 bit encryption when using privacy password.
      name: encrypt
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages SNMP users for monitoring.
    name: nxos-snmp-user
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Destination prefix of static route.
      name: prefix
      required: true
    - description: Next hop address or interface of static route. If interface, it must be the fully-qualified interface name.
      name: next_hop
      required: true
    - defaultValue: default
      description: VRF for static route.
      name: vrf
    - description: Route tag value (numeric) or keyword 'default'.
      name: tag
    - description: Name of the route or keyword 'default'. Used with the name parameter on the CLI.
      name: route_name
    - description: Preference or administrative difference of route (range 1-255) or keyword 'default'.
      name: pref
    - description: List of static route definitions
      name: aggregate
    - description: Track value (range 1 - 512). Track must already be configured on the device before adding the route.
      name: track
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages static route configuration
    name: nxos-static-route
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Configure the device hostname parameter. This option takes an ASCII string value or keyword 'default'
      name: hostname
    - description: Configures the default domain name suffix to be used when referencing this node by its FQDN.  This argument accepts either a list of domain names or a list of dicts that configure the domain name and VRF name or keyword 'default'. See examples.
      name: domain_name
    - description: Enables or disables the DNS lookup feature in Cisco NXOS.  This argument accepts boolean values.  When enabled, the system will try to resolve hostnames using DNS and when disabled, hostnames will not be resolved.
      name: domain_lookup
    - description: Configures a list of domain name suffixes to search when performing DNS name resolution. This argument accepts either a list of domain names or a list of dicts that configure the domain name and VRF name or keyword 'default'. See examples.
      name: domain_search
    - description: List of DNS name servers by IP address to use to perform name resolution lookups.  This argument accepts either a list of DNS servers or a list of hashes that configure the name server and VRF name or keyword 'default'. See examples.
      name: name_servers
    - description: Specifies the mtu, must be an integer or keyword 'default'.
      name: system_mtu
    - auto: PREDEFINED
      defaultValue: present
      description: State of the configuration values in the device's current active configuration.  When set to `present`, the values should be configured in the device active configuration and when set to `absent` the values should not be in the device active configuration
      name: state
      predefined:
      - present
      - absent
    description: Manage the system attributes on Cisco NXOS devices
    name: nxos-system
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The provided configuration
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: Final configuration state
      name: state
      predefined:
      - merged
      - replaced
      - deleted
    description: Telemetry Monitoring Service (TMS) configuration
    name: nxos-telemetry
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Toggles aggressive mode.
      name: aggressive
      predefined:
      - enabled
      - disabled
    - description: Message time in seconds for UDLD packets or keyword 'default'.
      name: msg_time
    - defaultValue: "no"
      description: Ability to reset all ports shut down by UDLD. 'state' parameter cannot be 'absent' when this is present.
      name: reset
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource. When set to 'absent', aggressive and msg_time are set to their default values.
      name: state
      predefined:
      - present
      - absent
    description: Manages UDLD global configuration params.
    name: nxos-udld
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: Manages UDLD mode for an interface.
      name: mode
      predefined:
      - enabled
      - disabled
      - aggressive
      required: true
    - description: FULL name of the interface, i.e. Ethernet1/1-
      name: interface
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages UDLD interface configuration params.
    name: nxos-udld-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: The set of username objects to be configured on the remote Cisco Nexus device.  The list entries can either be the username or a hash of username and properties.  This argument is mutually exclusive with the `name` argument.
      name: aggregate
    - description: The username to be configured on the remote Cisco Nexus device.  This argument accepts a string value and is mutually exclusive with the `aggregate` argument.
      name: name
    - description: The password to be configured on the network device. The password needs to be provided in cleartext and it will be encrypted on the device. Please note that this option is not same as `provider password`.
      name: configured_password
    - auto: PREDEFINED
      defaultValue: always
      description: Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password.  When set to `always`, the password will always be updated in the device and when set to `on_create` the password will be updated only if the username is created.
      name: update_password
      predefined:
      - on_create
      - always
    - description: The `role` argument configures the role for the username in the device running configuration.  The argument accepts a string value defining the role name.  This argument does not check if the role has been configured on the device.
      name: role
    - description: The `sshkey` argument defines the SSH public key to configure for the username.  This argument accepts a valid SSH key value.
      name: sshkey
    - defaultValue: "no"
      description: The `purge` argument instructs the module to consider the resource definition absolute.  It will remove any previously configured usernames on the device with the exception of the `admin` user which cannot be deleted per nxos constraints.
      name: purge
    - auto: PREDEFINED
      defaultValue: present
      description: The `state` argument configures the state of the username definition as it relates to the device operational configuration.  When set to `present`, the username(s) should be configured in the device active configuration and when set to `absent` the username(s) should not be in the device active configuration
      name: state
      predefined:
      - present
      - absent
    description: Manage the collection of local users on Nexus devices
    name: nxos-user
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: A dictionary of Vlan options
      isArray: true
      name: config
    - auto: PREDEFINED
      defaultValue: merged
      description: The state of the configuration after module completion.
      name: state
      predefined:
      - merged
      - replaced
      - overridden
      - deleted
    description: Create VLAN and manage VLAN configurations on NX-OS Interfaces
    name: nxos-vlans
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: VPC domain
      name: domain
      required: true
    - description: Role priority for device. Remember lower is better.
      name: role_priority
    - description: System priority device.  Remember they must match between peers.
      name: system_priority
    - description: Source IP address used for peer keepalive link
      name: pkl_src
    - description: |-
        Destination (remote) IP address used for peer keepalive link
        pkl_dest is required whenever pkl options are used.
      name: pkl_dest
    - defaultValue: management
      description: |-
        VRF used for peer keepalive link
        The VRF must exist on the device before using pkl_vrf.
        (Note) 'default' is an overloaded term: Default vrf context for pkl_vrf is 'management'; 'pkl_vrf: default' refers to the literal 'default' rib.
      name: pkl_vrf
    - description: Enables/Disables peer gateway
      name: peer_gw
    - description: |-
        Enables/Disables auto recovery on platforms that support disable
        timers are not modifiable with this attribute
        mutually exclusive with auto_recovery_reload_delay
      name: auto_recovery
    - description: |-
        Manages auto-recovery reload-delay timer in seconds
        mutually exclusive with auto_recovery
      name: auto_recovery_reload_delay
    - description: manages delay restore command and config value in seconds
      name: delay_restore
    - description: |-
        manages delay restore interface-vlan command and config value in seconds
        not supported on all platforms
      name: delay_restore_interface_vlan
    - description: |-
        manages delay restore orphan-port command and config value in seconds
        not supported on all platforms
      name: delay_restore_orphan_port
    - auto: PREDEFINED
      description: Manages desired state of the resource
      name: state
      predefined:
      - present
      - absent
      required: true
    description: Manages global VPC configuration
    name: nxos-vpc
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Group number of the portchannel that will be configured.
      name: portchannel
      required: true
    - description: VPC group/id that will be configured on associated portchannel.
      name: vpc
    - description: Set to true/false for peer link config on associated portchannel.
      name: peer_link
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - absent
      required: true
    description: Manages interface VPC configuration
    name: nxos-vpc-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of VRF to be managed.
      name: name
      required: true
    - auto: PREDEFINED
      defaultValue: up
      description: Administrative state of the VRF.
      name: admin_state
      predefined:
      - up
      - down
    - description: Specify virtual network identifier. Valid values are Integer or keyword 'default'.
      name: vni
    - description: VPN Route Distinguisher (RD). Valid values are a string in one of the route-distinguisher formats (ASN2:NN, ASN4:NN, or IPV4:NN); the keyword 'auto', or the keyword 'default'.
      name: rd
    - description: List of interfaces to check the VRF has been configured correctly or keyword 'default'.
      name: interfaces
    - description: This is a intent option and checks the operational state of the for given vrf `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vrf interfaces on device it will result in failure.
      name: associated_interfaces
    - description: List of VRFs definitions.
      name: aggregate
    - defaultValue: "no"
      description: Purge VRFs not defined in the `aggregate` parameter.
      name: purge
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    - description: Description of the VRF or keyword 'default'.
      name: description
    - defaultValue: "10"
      description: Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
      name: delay
    description: Manages global VRF configuration.
    name: nxos-vrf
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of the VRF.
      name: vrf
      required: true
    - auto: PREDEFINED
      description: Address-Family Identifier (AFI).
      name: afi
      predefined:
      - ipv4
      - ipv6
      required: true
    - description: Enable/Disable the EVPN route-target 'auto' setting for both import and export target communities.
      name: route_target_both_auto_evpn
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages VRF AF.
    name: nxos-vrf-af
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Name of VRF to be managed.
      name: vrf
      required: true
    - description: Full name of interface to be managed, i.e. Ethernet1/1.
      name: interface
      required: true
    - auto: PREDEFINED
      defaultValue: present
      description: Manages desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages interface specific VRF configuration.
    name: nxos-vrf-interface
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: VRRP group number.
      name: group
      required: true
    - description: Full name of interface that is being managed for VRRP.
      name: interface
      required: true
    - defaultValue: "1"
      description: Time interval between advertisement or 'default' keyword
      name: interval
    - defaultValue: "100"
      description: VRRP priority or 'default' keyword
      name: priority
    - defaultValue: "yes"
      description: Enable/Disable preempt.
      name: preempt
    - description: VRRP virtual IP address or 'default' keyword
      name: vip
    - description: Clear text authentication string or 'default' keyword
      name: authentication
    - auto: PREDEFINED
      defaultValue: shutdown
      description: Used to enable or disable the VRRP process.
      name: admin_state
      predefined:
      - shutdown
      - no shutdown
      - default
    - auto: PREDEFINED
      defaultValue: present
      description: Specify desired state of the resource.
      name: state
      predefined:
      - present
      - absent
    description: Manages VRRP configuration on NX-OS switches.
    name: nxos-vrrp
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: VTP domain name.
      name: domain
      required: true
    description: Manages VTP domain configuration.
    name: nxos-vtp-domain
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: VTP password
      name: vtp_password
    - auto: PREDEFINED
      defaultValue: present
      description: Manage the state of the resource
      name: state
      predefined:
      - present
      - absent
    description: Manages VTP password configuration.
    name: nxos-vtp-password
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - auto: PREDEFINED
      description: VTP version number.
      name: version
      predefined:
      - "1"
      - "2"
      required: true
    description: Manages VTP version configuration.
    name: nxos-vtp-version
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Interface name for the VXLAN Network Virtualization Endpoint.
      name: interface
      required: true
    - description: Description of the NVE interface.
      name: description
    - description: Specify mechanism for host reachability advertisement.
      name: host_reachability
    - description: Administratively shutdown the NVE interface.
      name: shutdown
    - description: Specify the loopback interface whose IP address should be used for the NVE interface.
      name: source_interface
    - description: Suppresses advertisement of the NVE loopback address until the overlay has converged.
      name: source_interface_hold_down_time
    - description: Global multicast ip prefix for L3 VNIs or the keyword 'default' This is available on NX-OS 9K series running 9.2.x or higher.
      name: global_mcast_group_L3
    - description: Global multicast ip prefix for L2 VNIs or the keyword 'default' This is available on NX-OS 9K series running 9.2.x or higher.
      name: global_mcast_group_L2
    - description: Enables ARP suppression for all VNIs This is available on NX-OS 9K series running 9.2.x or higher.
      name: global_suppress_arp
    - description: Configures ingress replication protocol as bgp for all VNIs This is available on NX-OS 9K series running 9.2.x or higher.
      name: global_ingress_replication_bgp
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Manages VXLAN Network Virtualization Endpoint (NVE).
    name: nxos-vxlan-vtep
  - arguments:
    - description: hostname or IP of target. Optionally the port can be specified using :PORT. If multiple targets are specified using an array, the integration will use the configured concurrency factor for high performance.
      isArray: true
      name: host
      required: true
    - description: Interface name for the VXLAN Network Virtualization Endpoint.
      name: interface
      required: true
    - description: ID of the Virtual Network Identifier.
      name: vni
      required: true
    - description: This attribute is used to identify and separate processing VNIs that are associated with a VRF and used for routing. The VRF and VNI specified with this command must match the configuration of the VNI under the VRF.
      name: assoc_vrf
    - auto: PREDEFINED
      description: Specifies mechanism for host reachability advertisement.
      name: ingress_replication
      predefined:
      - bgp
      - static
      - default
    - description: The multicast group (range) of the VNI. Valid values are string and keyword 'default'.
      name: multicast_group
    - description: Set the ingress-replication static peer list. Valid values are an array, a space-separated string of ip addresses, or the keyword 'default'.
      name: peer_list
    - description: Suppress arp under layer 2 VNI.
      name: suppress_arp
    - description: Overrides the global ARP suppression config. This is available on NX-OS 9K series running 9.2.x or higher.
      name: suppress_arp_disable
    - auto: PREDEFINED
      defaultValue: present
      description: Determines whether the config should be present or not on the device.
      name: state
      predefined:
      - present
      - absent
    description: Creates a Virtual Network Identifier member (VNI)
    name: nxos-vxlan-vtep-vni
  dockerimage: demisto/ansible-runner:1.0.0.21184
  script: ''
  subtype: python3
  type: python
fromversion: 6.0.0
tests:
- No tests (auto formatted)
deprecated: true