Feed Integrations ↗

Feed integrations allow fetching indicators from feeds, such as TAXII and Office 365.

An example feed integration can be seen here.

While feed integrations are developed the same as other integrations, they include several extra configuration parameters and APIs.

Feed integration naming convention

Feed integration names (id, name and display fields) should end with the word Feed. This consistent naming convention ensures that users can easily understand what the integration is used for.

Required feed integration parameters

Every feed integration should have the following parameters in the integration YAML file:

- display: Fetch indicators
  name: feed
  defaultvalue: true
  type: 8
  required: false
- display: Indicator Reputation
  name: feedReputation
  defaultvalue: feedInstanceReputationNotSet
  type: 18
  required: false
  options:
  - None
  - Good
  - Suspicious
  - Bad
  additionalinfo: Indicators from this integration instance will be marked with this
    reputation.
- display: Source Reliability
  name: feedReliability
  defaultvalue: F - Reliability cannot be judged
  type: 15
  required: true
  options:
  - A - Completely reliable
  - B - Usually reliable
  - C - Fairly reliable
  - D - Not usually reliable
  - E - Unreliable
  - F - Reliability cannot be judged
  additionalinfo: Reliability of the source providing the intelligence data.
- display: ""
  name: feedExpirationPolicy
  defaultvalue: indicatorType
  type: 17
  required: false
  options:
  - never
  - interval
  - indicatorType
  - suddenDeath
- display: ""
  name: feedExpirationInterval
  defaultvalue: "20160"
  type: 1
  required: false
- display: Feed Fetch Interval
  name: feedFetchInterval
  defaultvalue: "240"
  type: 19
  required: false
- display: Bypass exclusion list
  name: feedBypassExclusionList
  defaultvalue: ""
  type: 8
  required: false
  additionalinfo: When selected, the exclusion list is ignored for indicators from
    this feed. This means that if an indicator from this feed is on the exclusion
    list, the indicator might still be added to the system.

The defaultvalue of the feedReputation, feedReliability, feedExpirationPolicy, and feedFetchInterval parameters should be set according to the qualities associated with the feed source for which you are developing a feed integration.

Configure incremental feed integrations

Incremental feeds pull only new or modified indicators that have been sent from the third party vendor. As the determination if the indicator is new or modified happens on the third-party vendor's side, and only indicators that are new or modified are sent to Cortex XSIAM, all indicators coming from these feeds are labeled new or modified.

Examples of incremental feeds usually include feeds that fetch based on a time range. For example, a daily feed which provides new indicators for the last day or a feed which is immutable and provides indicators from a search date onwards.

To indicate to Cortex XSIAM that a feed is incremental, add the configuration parameter: feedIncremental. If the user is not able to modify this setting, set the parameter to hidden with a defaultValue of true. For example:

- additionalinfo: Incremental feeds pull only new or modified indicators that have been sent from the integration. The determination if the indicator is new or modified happens on the third-party vendor's side, so only indicators that are new or modified are sent to Cortex XSIAM. Therefore, all indicators coming from these feeds are labeled new or modified.
  defaultvalue: 'true'
  display: Incremental feed
  hidden: true
  name: feedIncremental
  required: false
  type: 8

If the feed supports both incremental and non-incremental modes, provide the configuration parameter as non-hidden. Thus, a user will be able to modify this settings as they see fit. In the feed code inspect the feedIncremental parameter to perform the proper fetch logic.

Code example of incremental feeds:

Feed integration commands

Every feed integration has a minimum of three commands:

  • test-module - The command that is run when the Test button in the configuration panel of an integration is clicked.
  • <product-prefix>-get-indicators - Where <product-prefix> is replaced by the name of the Product or Vendor source providing the feed. For example, if you were developing a feed integration for Microsoft Intune, this command might be called msintune-get-indicators. This command should fetch a limited number of indicators from the feed source and display them in the War Room.
  • fetch-indicators - this command will initiate a request to the feed endpoint, format the data fetched from the endpoint to conform to Cortex XSIAM's expected input format, and create new indicators. If the integration instance is configured to fetch indicators, then this is the command that will be executed at the specified feed fetch Interval.

Create indicators with demisto.createIndicators()

Use the demisto.createIndicators() function when the fetch-indicators command is executed. Here is an example from an existing feed integration:

def main():
    params = demisto.params()

    client = Client(params.get('insecure'),
                    params.get('proxy'))

    command = demisto.command()
    demisto.info(f'Command being called is {command}')
    # Switch case
    commands = {
        'test-module': module_test_command,
        'tor-get-indicators': get_indicators_command
    }
    try:
        if demisto.command() == 'fetch-indicators':
            indicators = fetch_indicators_command(client)
            # we submit the indicators in batches
            for b in batch(indicators, batch_size=2000):
                demisto.createIndicators(b)
        else:
            readable_output, outputs, raw_response = commands[command](client, demisto.args())
            return_outputs(readable_output, outputs, raw_response)
    except Exception as e:
        raise Exception(f'Error in {SOURCE_NAME} Integration [{e}]')

The batch function is imported from CommonServerPython. We see that indicators are returned from calling fetch_indicators_command and are passed to demisto.createIndicators in batches.

Feed indicator objects

Indicator Objects are passed to demisto.createIndicators. An example:

{
    "value": value,
    "type": raw_json['type'],
    "rawJSON": raw_json,
    "fields": {'recordedfutureevidencedetails': lower_case_evidence_details_keys},
    "score": score
}

The object key and values:

  • "value" - required. The indicator value, e.g., "8.8.8.8".

  • "type" - required. The indicator type (types as defined in Cortex XSIAM), e.g., "IP". One can use the FeedIndicatorType class to populate this field. This class, which is imported from CommonServerPython has all of the indicator types that come out-of-the-box with Cortex XSIAM.

    class FeedIndicatorType(object):
    """Type of Indicator (Reputations), used in TIP integrations"""
    Account = "Account"
    CVE = "CVE"
    Domain = "Domain"
    DomainGlob = "DomainGlob"
    Email = "Email"
    File = "File"
    FQDN = "Domain"
    MD5 = "File MD5"
    SHA1 = "File SHA-1"
    SHA256 = "File SHA-256"
    Host = "Host"
    IP = "IP"
    CIDR = "CIDR"
    IPv6 = "IPv6"
    IPv6CIDR = "IPv6CIDR"
    Registry = "Registry Key"
    SSDeep = "ssdeep"
    URL = "URL"
  • "rawJSON" - required. This dictionary should contain the "value" and "type" fields as well as any other unmodified data returned from the feed source about an indicator.
  • "fields" - optional. A dictionary that maps values to existing indicator fields defined in Cortex XSIAM where the key is the cliname of an indicator field. To see the full list of existing fields:
    1. In Cortex XSIAM, go to Settings → Configurations → Object Setup → Indicators and click on the Fields tab.
    2. To inspect a specific field, Edit the field. Note that the field's cliname is listed as machinename.

  • "relationships" - optional. This list should contain a dictionary of values of the relationships. There are two ways to create relationships:

    • When creating an indicator.
    • Creating relationships by themselves without indicators associated with the relationships.

    For both ways, use demisto.createIndicators.

    To create a relationship:

    1. Create an EntityRelationship object with the relationships data. If more than one relationship exists, create a list and append all of the EntityRelationship objects to it.

      The name of the relationships should be one of the existing relationships:

      For more information, see entity relationship.

    2. Use the to_indicator() function of the object to convert each object (or a list of objects) to the required format.

    3. If the relationships is part of an indicator, add the list to the relationship key of the indicator after running to_indicator.

      If the relationship is not attached to an indicator, create a dummy indicator with the value $$DummyIndicator$$ and add the relationships key with the list after running to_indicator.

Note

In indicators of type "File", if you have multiple hash types for the same file (i.e., MD5, SHA256, etc.), you can use the corresponding "fields" to associate all hashes to the same object. The supported fields are: md5, sha1, sha256, sha512, ssdeep. You can use any of the aforementioned hash types as the indicator value for an indicator of type "File".